6
2.3.8 To turn the burner off, turn the
gas control
to
OFF
position.
2.3.9
G3845 Draining
– Draining old oil must be done after the oil has been allowed to cool.
Ignoring this advice may lead to burns. Connect the supplied
drain pipe
onto the
drain valve
1
as shown below. The drain valve is fitted with a spring loaded safety
latch. Push this latch aside
2
to unlock the handle, then turn handle
3
to empty the oil
into a suitable disposal container. Any large pieces of debris will be captured by the
crumb catcher.
2.3.10
G3845F Draining
– Draining old oil must be done after the oil has been allowed to
cool. Ignoring this advice may lead to burns and build up of oily condensation inside
the appliance. The drain valve is fitted with a spring loaded safety latch. Push this latch
aside and turn the handle (similarly to 2.3.9) to drain oil into the supplied
oil buckets
.
The
oil buckets
can then be removed and the oil transferred to a suitable disposal
container.
THE DRAIN VALVE MUST ONLY BE OPERATED WHEN THE
GAS CONTROL IS SET TO OFF. NOT FOLLOWING THIS
PART OF THE PROCEDURE WILL LEAD TO THE RESIDUAL
OIL IN THE FRYER CATCHING FIRE.
THE OIL BUCKETS MAY BE HOT AND HEAVY WHEN FULL
OF OIL. TAKE CARE WHEN REMOVING.
ENSURE THE FILTRATION BASKETS AND MESH FILTER
ARE CLEANED REGULARLY. FAILURE TO DO SO MAY
CAUSE THE OIL TO OVERFLOW FROM THE OIL BUCKET.
