COTTERLESS CRANKS ADJUSTMENT
IMPORTANT
Please check if the chainwheel and cranks of your new bicycle are of the cotter less type
as illustrated on page 3.
If so, to ensure trouble free operation it is important that the nuts securing these item to the
bottom bracket axle are tightened as securely as possible.
It is strongly recommended that the tightness of the nuts be
checked after the first two
weeks of use
and a maximum of three monthly intervals thereafter.
BRAKES
WARNING
For safe riding it is important to completely understand the operation of your bicycleʼs
brake system. Improper use of your bicycleʼs brake system may result in a loss of control or
an accident, which could lead to severe injury. Because each bicycle may handle differently,
be sure to learn the proper braking technique (including brake lever pressure and bicycle
control characteristics) and operation of your bicycle. This can be done by consulting your
professional bicycle dealer and this ownerʼs manual, and by practicing your riding and
braking technique.
The bicycle is equipped with two independant brake mechanisms. One on the front wheel
and the other on the rear wheel. The brakes are operated by hand levers fastened to the
handlebars. The right lever controls the front brake and the left lever controls the rear brake.
To stop with safety:
1
. Operate the rear brake (left lever) slightly before the front brake (right lever).
2
. Apply firm pressure to both front and rear brake levers.
CAUTION:
If the front brake is applied with too much pressure, the rider may be thrown off
the bicycle.
3
. Never apply the front brake on a turn. This is especially dangerous when cornering or
riding on slippery or loose surface roads.
CAUTION:
Brakes are less effective in wet weather. Ride slower and allow more distance
for stopping.
Note:
Do not ride your bicycle if the braking system is not working correctly. If you are in
doubt, take your bicycle to your dealer.
7
TABLE OF RECOMMENDED TORQUE VALUES
DESCRIPTION
TORQUE
1 Stem Expander Bolt
20Nm 15lb-ft
(where fitted)
1A A-Head Steerer Clamp Bolts
10Nm 8lb-ft
(where fitted)
2 Stem Binder Bolt
10Nm 8lb-ft
3 Brake Fixing Bolt (non disc)
5Nm 4lb-ft
Applies to both front and rear brake
4 Front Axle Nut
30Nm 22lb-ft
5 Chain Wheel Securing Bolt
38Nm 28lb-ft
6 Pedal
40Nm 30lb-ft
7 F/Derailleur Cable Fixing Bolt
4Nm 3lb-ft
8 R/Derailleur Cable Fixing Bolt
4Nm 3lb-ft
9 Rear Axle Nut
30Nm 22lb-ft
10 Seat Pin
(Hexagonal Head)
10Nm 8lb-ft
Seat Pin
(Allen Head)
10Nm 8lb-ft
11 Front and Rear
3Nm 2.5lb-ft
Reflector Mounting Nut
12 Saddle Clamp Bolt
(Hexagonal Head)
15Nm 11lb-ft
1A
1
2
3
4
5
6
7
8
9
10
11
12
13
