background image

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

21

7.  Installation

Service and Spares

Firstly, please complete the appliance details below and keep them safe for future reference – this information will enable us 
to accurately identify the particular appliance and help us to help you. Filling this in now will save time and inconvenience 
if you later have a problem with the appliance. It may also be of benefit to keep your purchase receipt with this leaflet. You 
may be required to produce the receipt to validate a warranty field visit.

* This information is on the appliance data badge

If you have a problem

In the unlikely event that you have a problem with your appliance, please refer to rest of this booklet, especially the problem 
solving section, first to check that you are using the appliance correctly.

If you are still having difficulty, contact you retailer

Please note

If your appliance is outside the 12-month warranty period, our service provider may charge for this visit.

If you request an engineer to visit and the fault is not the responsibility of the manufacture, our service provider reserves 
the right to make a charge.

Appointments not kept by you may be subject to a charge.

Out of Warranty

We recommend that our appliances are serviced regularly throughout their life to maintain the best performance and 
efficiency. The frequency of service will depend on usage – for normal usage once a year should suffice. 

Service work should only be carried out by an suitably Authorised Person.

Spare Parts

To maintain optimum and safe performance, we recommend that only genuine spare parts are used. Do not use re-
conditioned or unauthorised controls. Contact your retailer.

Retailer’s Name and Address

Andi-Co Appliance Pty Ltd.
1 Stamford Road,
Oakleigh, 
VIC 3166

Tel: (03) 9569 1225
Fax: (03) 9569 1450
Email: [email protected]

Name of Appliance

Ceramic electric

Appliance Serial Number*

Fuel Type

Electric

Date of Purchase

Installer’s Name, Address and 
Telephone No.

Date of Installation

Summary of Contents for Classic 110 Dual Fuel













































Reviews: