DRAFT
8
2. Put the tie wrap around handle bar of
cycle & tighten it.
1 . Insert the tie wrap into a gap between
console display & mounting Pad.
3. Tighten up M4 bolt with help of M3 Allen
key.
2.Place the bottom housing behind the
Handlebar & screw them with M4 bolt.
1.Place the top housing of Plus-Minus
Button on handlebar of cycle
.
Note : Please Avoid Over tigthening.
Console Installation
Display
Plus-Minus button
Page 8 of 18
Rev. 0 March 23, 2013
