DRAFT
13
Power Level Setting:
Different assistance levels can be set by
using power levels from +1 to +5.
1. Press key (+) to increase power levels
from 0 to +5 as shown.
2. Press key (-) to decrease the power
levels down to -5 as shown.
Speed Display Setting:
Speed can be displayed in KPH or MPH. Press
MODE key one time, Hx display console will
enter into speed selection mode and it will
start blinking between MPH and KPH. Click Key
1 again to select between MPH and KPH.
Battery Current Consumption:
&
Battery Current Regeneration:
Backlight :
Hx-Display provides the backlight
functionality.
Just hold key 4 for 2 sec, which initiates the
function of back light. This backlight
automatically goes OFF after 7 to10 sec.
Display Battery charging :
1.Insert the USB Connector into charger USB
port & Connect the4 pin connector to display 4
pin connector.
2.Turn on supply button.
When LED shows RED color, it means battery
still charging.
When LED shows GREEN color, it means
charging completed & Ready to use.
Page 13 of 18
Rev. 0 March 23, 2013
