DRAFT
12
ECO Mode :
By default the system will operate in ECO mode where you don't see any modes being
displayed.
Clock Setting:
1.Press and hold key (+) for 5 seconds, until
Hx display console will display the clock
mode as shown .
2.Press and hold key (+) until lower
segments show 08:88:88 as shown in fig.
3.Key (mode) is used for changing the
cursor position; Key (+) is used for
setting the number (from 0 to 5).
For AM/PM selection:
Press Key (mode) to select AM/PM.
Odometer Setting :
1.Press and hold MODE key for 2 seconds,
until Hx display console shows Odometer
(ODO) mode, as shown.
2.
Press key 2 (+) until ODO data resets, as
shown.
Wheel Setting:
1.
Press and hold key 3 (-) until “CRM” is
displayed in the lower segments as shown.
2.
By using key (mode) and key (+) we can
adjust the wheel
size as outlined below.
MODE key is used for changing the cursor
position;
Key 2 (+) is used for setting the number
(from 0 to 9).
(for reference some wheel dimensions are given in table)
Wheel Diameter Circumference (mm)
18 inches
1436
20 inches
1596
24 inches
1915
26 inches
2075
27 inches
2156
28 inches
2234
Page 12 of 18
Rev. 0 March 23, 2013
