STARKY PRO
GB
31
Prior to any use, make sure that all
filters are installed correctly and
undamaged.
• Take the whole power cable
attached to the device and
connect its plug to the mains
socket. On the appliance, the red
standby indicator lights up.
• To switch the device on, press the
On/Off button once, now the
vacuum cleaner is put into opera-
tion. At that point, the appliance
operates at half power (level 1).
The LED flashes yellow. If you
need a higher power level, press
again the On/Off button (level 2).
The LED flashes green. Now, the
appliance operates at the highest
power level. By pressing the
button one more time, you can
switch off the appliance. Figures
7, 8, and 9
7
8
9
NOTE!
For vacuuming carpets, we
recommend level 1. For
vacuuming hard floors, the
second level is recommended.
WARNING!
Before every use, always check
the appliance and its power cable.
A damaged device may pose the
risk of injuries and must not be
used.
Before you start
