Fakir ROBERT-L, Operating Instructions Manual

Page: 115 / 126

89
ROBERT-L GB
Assembly & Disassembly of Side Cleaning Brush:
1.Release the screw in the main
shaft of the side brush before
changing the side brush.
2.Press the side brush against
the main shaft and then fasten
the screw. (Refer to the
figure)
Cleaning of Brush and Floor Brush:
1.Clear the hair or big dust
particles on the brush and
floor brush regularly to
improve the cleaning
performance. Clean the dust at
the air intake. Clean the
wastepaper or small particles
by dust brush directly. Rotate
the brush carefully and cut by
scissors or pull by hand the
hair, yarn and other twisted
objects.
2.The cleaning of the brush and
floor brush can be done by
reference to the assembly &
disassembly.
9-3. Assembly & Disassembly and Cleaning of Left/Right Wheel and
Front Wheel: Assembly & Disassembly and
Cleaning of Left/Right Wheel:
1.Release the screw of the
left/right wheel by the
screwdriver. (Refer to
Figure 1)
2.Take out the left/right wheel and clean
them with the brush (Refer to Figure
2). Don’t wash them in water!
3.Place the left/right
wheel in the original
position, and tighten
the screw while
assembling.
Figure 1
Figure 2