Fakir ROBERT-L, Operating Instructions Manual

Page: 110 / 126

84
GB
ROBERT-L
1. Open the battery cover before using, place 2x”D”
batteries (not included) into the box correctly. Pay
attention to the polarity or the Space Isolator will not
work.
2. The battery consumption duration is related to the
selected transmitting distance and working duration,
please select proper transmitting distance and low
transmitting power to save the battery, so don’t forget
to turn off the toggle switch while unused.
3. There will be some difference in the direction,
transmitting infrared signal of the Space Isolator and
receiving distance of the Cleaner due to environmental
impact and movement of the Cleaner during the actual
using. The difference above may vary based on the actual
environment and different battery power of the Cleaner
and Space Isolator.
Installation method of Space Isolator:
1.
The Space Isolator is placed at the entrance to the stair or
room generally.
2. You can place the Space Isolator at proper position to
stop the Cleaner passing through some places.
3. Remove obstacles from the area you want to block in front
of the Space Isolator as much as possible for fear of poor
effect.
1. The Space Isolator should be placed at the same
level of the ground where the Cleaner is running.
2. You should check whether the Cleaner can pass the
Space Isolator while using it first.
3. The distance between the Space Isolator and recharger
should be more than 3m, or there will be interference.
4. The Docking Station should not be installed within
the signal scope of the Space Isolator.