Faittoo FT-AVR2204H, User Manual

Page: 40 / 64

Faittoo
®
HD Hybrid 5 in 1 DVR Manual V1.2 http://www.faittoo.com service@faittoo.com
4.14.3.1 Record plan
For more detail refer to “4.13.2 Record Plan”
4.14.3.2 Sensor Setup (Not available)
4.14.4 Network Setup
4.14.4.1 Network setup
Operation steps:
Right click the main menu
“
System Setup”
→
“
Network setup”, then get setting interface as below:
Figure 4-46
Detailed functions:
Function Type Description Remark
DHCP Automatically obtain IP, If choosing this function,
users get IP address of the device automatically,
otherwise it is set manually.
If choosing this function,
users can’t change IP
address.
Cloud(P2P) To show Cloud ID of the device. Failure to connect the
network will show “offline”.
IP address For displaying IP address of the device. If users
want to change IP address, they can manually
enter the IP address.
The default IP address is
192.168.1.114
Subnet Mask For dispalying the subnet mask of the device.
Gateway For displaying the device's gateway address.
MAC Address For displaying the hardware address information of
the device.
Preferred DNS Set to be consistent with the router's DNS
Web Port For setting web port, which is used for data
transmission when remote monitoring. When this
port is disabled or occupied, users have to change
this value.
Cloud(P2P) To show Cloud ID of the device. Failure to connect the
network will show “offline”.
Network status It is used for show Network status
39