Faittoo FT-AVR2204H, User Manual

Page: 26 / 64

Faittoo
®
HD Hybrid 5 in 1 DVR Manual V1.2 http://www.faittoo.com service@faittoo.com
Then set the PTZ CAMERA and DVR with same Protocol, Baud rate, Address code.
For example, PTZ CAMERA Protocol is “Pelco-D”, Baud rate is “2400”, Address code is “1”, and connect
this PTZ CAMERA to DVR's Channel 1, the DVR setting will be shown as below:
Right- click into the "System Setup" - > "Channel Setup" - > " PTZ Setup"
Figure 4-22
Then click “?” into the PTZ control interfa ce, See section 4.12.3.
4.12.2 UTC coaxial control
In UTC coaxial control mode, PTZ camera must support UTC function, the camera through the coaxial
cable connected to the DVR VIDEO IN, and set it as shown below:
Figure 4-23
4.12.3 PTZ control
Operation Procedure:
1) Right-click the shortcut menu bar " PTZ Control" to enter its control interface as shown below:
Figure 4-24
2) To adjust PTZ direction, click the " Up / Down / Left / Right " arrow keys
3) Click the " zoom/focus/iris " to adjust image scaling/focus/ image brightness. The premise is PTZ
camera can support Zoom, Focus and Iris
4) UTC Menu : When you connect PTC camera through the UTC coaxial control, click UTC MENU to
set the camera's menu
Illustration
●
If you want to control one channel’s PTZ, double-click into the channel, right mouse click to
select "PTZ Control". Click " PTZ Control" is defaulted to enter the first channel.
Select UTC
Address code
Protocol
Baudrate
Select RS485
Select Channel 1
25