FAIR srl
- Via Lago di Costanza 24 - 36015 Schio - Vicenza - Italia - +39 0445 698 000 - [email protected] - www.fair-europe.com
Pag. 2
1.
Turn on the stove for about 15 minutes to warm all of its parts.
2.
Turn off the stove and wait for the shut-off phase to be completed before starting the disassembly.
3.
Disconnect the power supply.
4.
You must have the following materials before handling the stove:
Anti-scratch protection gloves
Powder mask
Ash aspirator, brush, screwdriver, rubber hammer, hex key and spatula
Any gaskets and replacement tubes
High temperature silicone 750°C or higher
5.
Check the chimney, clean the T-fitting (if present),
inspect the entire section of the tube connecting
the stove to the chimney and the chimney itself.
6.
Check if gaskets and any fittings / tubes are intact.
If damaged replace them.
7.
Remove the top of the stove by unscrewing the 3
screws holding it secured, using hexagonal
wrench.
