FAIR srl
- Via Lago di Costanza 24 - 36015 Schio - Vicenza - Italia - +39 0445 698 000 - [email protected] - www.fair-europe.com
Pag. 4
13.
Remove the brazier and ash drawer from their
housings, empty them and clean them properly.
14.
Pull the plate below the ash drawer, tilt it and
rotate it, this will allow you to access the smoke
motor compartment.
15.
Aspirate the brazier compartment and the engine
compartment under the ash drawer, releasing
them from all the soot present. Be careful not to
bend the fan, it may compromise the functioning
of the stove.
16.
Vacuum the dust and clean the surface where the inspection is under the ash drawer, check the
overall condition and then close it all.
17.
Before assembling, check the integrity of the brazier and drawer and make sure that they are
properly cleaned for proper operation of the stove.
18.
Reinstall the inspection plates by carefully cleaning the base and securely tightening the retaining
screws.
