30iE - v1111 - Installation/Operation - (44/48)
4.2.2 Safety conditions
Read the following safety measures in order to prevent damage to personnel, to this
product and to those products connected to it.
Fagor Automation shall not be held responsible for any physical or material damage
derived from the violation of these basic safety regulations.
Do not manipulate the inside of the unit
Only personnel authorized by Fagor Automation may manipulate the inside of this
unit.
Do not handle the connectors while the unit is under power.
Before handling the connectors (mains, feedback, etc.) make sure that the unit is not
under power.
Use proper Mains AC power cables.
To avoid risks, use only the Mains AC cables recommended for this unit.
Avoid electrical overloads
In order to avoid electrical discharges and fire hazards, do not apply electrical voltage
outside the range indicated in chapter 2 of this manual
Ground connection
In order to a void electrical discharges, connect the ground terminals of all the
modules to the main ground terminal. Before connecting the inputs and outputs of
this unit, make sure that all the grounding connections are properly made.
Before powering the unit up, make sure that it is connected to ground
In order to avoid electrical discharges, make sure that all the grounding connections
are properly made.
Ambient conditions
Respect the limits f or temperature and relative hu midity indicated in chapter
"General technical characteristics" on page 28
Do not work in explosive environments
In order to avoid risks, damage, do not work in explosive environments.
Work environment
This unit is ready to be used in Industrial Environments complying with the directives
and regulations effective in the European Community.