14
6
CLUTCH AJUSTMENT
If it was necessary to adjust the clutch, proceed as follows:
Loosen the bolt on the top of the clutch with a no. 13 wrench and with a no. 4 Allen wrench, loosen
the side bolt. (Fig 17, Fig. 18)
With a torque wrench adjusted to 12 Nm and a “C” wrench (Fig. 19) which will hook onto one of
the lateral holes of the clutch, tighten this clockwise until the torque wrench indicates that the
required torque has been reached (the end of the wrench “clicks”). (Fig. 20).
Once this has been done, tighten the top and lateral bolts. (Fig 19, Fig. 20)
Should a torque wrench not be available, tighten only with the “C” wrench and then check the
tightness with the dishwasher loaded with baskets and dishes.
Tighten
Loosen
Fig. 18
Torque wrench
“C” Wrench
Fig. 19
Tighten
Fig. 20
Fig. 20
Top bolt
Side bolt
Fig. 17
