20
It is recommended that the detergent and the dispenser setting are defined
by a technician specialised in the use of chemical products in order to
ensure a more efficient wash.
If you require the installation of an NON FAGOR Detergent and/or Rinse
pump, a form MUST be fill out prior to installation by your installer. Failure
to do so will void your Warranty. This form can be located inside your
dishwasher. If lost, please contact Fagor to get a copy.
The detergent pump and rinse dispensing pump will only work during the
process of fill and rinse.
8.9
Pressure pump
If the mains water pressure is less than 20psi at pressure gauge, you have the option of installing a
pressure pump. If the pressure is less than 20psi at pressure gauge the machine may operate
incorrectly. The electrical connections for the pressure pump are shown in the electric circuit
diagram. The water connection to the pressure pump is shown in
Fig 4.
If the mains water pressure is less than 20psi at pressure gauge please contact your supplier or the
manufacturer to request the PRESSURE PUMP KIT.
The pressure pump must only be installed by personnel authorised by the manufacturer,
and the manufacturer does not accept liability in the event of incorrect installation.
8.10
Recycling
The product packaging consists of:
A wooden pallet.
Cardboard.
A polypropylene band.
Expanded polyethylene.
All the packaging used around the machine can be recycled. The correct disposal of these products
will help to protect the environment. For further information regarding the recycling of these products,
please refer to the relevant office of the local body Dispose of these materials in accordance with
current legislation.
