17
8.5
Drainage connection
Attach the drain hose as shown in Fig. 5. It is recommended to affix a siphon pipe to prevent odors.
All piping from the machine to the drain must be a minimum 1-
1/2” I.P.S. There should also be an air
gap between the machine drain line and the drain. For natural overflow efficiency use floor drain.
The water draining from the machine must flow freely and therefore the drainage pipe should be
lower than the drainage outlet
(Fig.5)
.
If the drainage pipe is not lower, a drainage pump will be
required. This must not be mounted at a height of more than
26 3/4
”
(
Fig 6
)
. In this case, the pump
may be requested at the time of purchase or subsequently.
Fig 5
. Drainage installation.
D: Drain hose C: Drain collector
Fig 6.
Installation of drainage at a height using drainage pump
.
The drainage pump must only be installed by personnel authorised by the
manufacturer, and the manufacturer does not accept liability in the event of
incorrect installation.
