background image

4

SAFETY GUIDELINES

SAFETY GUIDELINES

This cooking hob has been designed for

private domestic use.

This appliance must be installed in

compliance with currently applicable
regulations and used only in a well-ventilated
location. Consult this guide before installing
and using your appliance.

Never leave the appliance unattended when

in use.

These cooking hobs are intended solely for

cooking food and drinks and do not contain
any asbestos-based materials.

This appliance is not connected to a

combustion by-product disposal system. It
must be installed and connected in
compliance with all applicable laws. Special
attention should be given to applicable
ventilation regulations.

Do not store cleaning 

PRODUCTS

or

FLAMMABLE

PRODUCTS

(aerosol cans or

pressurised containers, as well as papers,
cookbooks, etc.) in the cabinet beneath your
cooking hob.
— If you use a drawer under the hob, avoid
using it to store heat sensitive items (plastic,
papers, aerosol cans, etc.).

Your hob must be disconnected from the

power supply (electricity and gas) before
undertaking repair work.

If you plug electrical appliances into a plug

socket which is within close proximity of the
hob ensure that any wires do not contact the
cooking zones.

As a safety measure, remember to shut-off

the mains gas supply tap or the
butane/propane gas cylinder tap (whichever
is applicable).

The 

CE

compliance mark is affixed to these

hobs.

Installation should only be undertaken by

qualified fitters and technicians.

Before installation, make sure that the local

distribution conditions (gas type and
pressure) and the settings on the appliance
are compatible.

This appliance is not intended to be used

by persons (including children) with reduced
physical, sensory or mental abilities, or those
lacking experience or awareness, unless they
are supervised by someone responsible for
their safety or they have received suitable
training in its operation from the said person.
Children must be supervised to prevent them
from playing with the appliance.

This unit is not intended to be operated

using an external timer or a separate remote
control system.

This hob is compliant with standard

EN 60335-2-6 relating to the heating of
cabinets and the Class 3 standard with regard
to installation (as per standard EN 30-1-1).

Warning

The required hob settings are written

on a sticker inside the instruction guide
pouch and on the packaging.

In order to easily locate any reference
information relating to your appliance, we
recommend that it is noted on the “After-
Sales Service Department and Customer
Relations” page (this page also explains
where this information can be found on your
appliance).

CAUTION: if a crack appears in the surface,
disconnect the appliance from the power
supply to prevent any risk of electric shock.

For the following references : CFI-4GLSTANAT* - CFI-3GLSTANAT*
your hob is delivered set-up for 

natural gas

.

For the following references : CFI-4GLSTABUT* - CFI-3GLSTABUT* - 2MCF-

2GSAXBUT* your hob is delivered set-up for 

butane gas.

Summary of Contents for Cooking hob

























Reviews: