Chaper 5 - page 6
MCO-TCO work mode
5.5 GRAPHICS
When you press
the CNC displays the graphics screen.
To leave the graphics m ode press
or
In the Operation Manual, M-MC or T-TC models, section «Graphics» in the «Execution / Simulation»
chapter, there is an explanation of how to operate during graphics. Nevertheless, there will now be
a brief description of the softkeys.
Type of graphics.
It depends on the selected model MCO / TCO. Refer to the relevant operating manual.
Zone to be displayed
Allows modification of the display zone, by defining the maximum and minimum coordinates
of each axis.
To select the maximum and minimum coordinates use
After defining all the data press
After selecting a new display zone the CNC erases the screen showing the axes or the
unmachined part.
The zone displayed cannot be modified during execution or simulation of the piece. In this case
stop execution or simulation by pressing
Zoom
This function allows the graphics zone to be increased or reduced in size.
It displays a window superimposed on the graphic represented and another on the figure in the
lower right-hand part of the screen. These windows indicate the new zone of graphics that is
being selected.
To move the window use
to increase or reduce its size use s “+” “-”, and
for the CNC to assume these values press
Each time a new display zone is selected the CNC keeps the present graphics. It does not erase
it.
When you press
to continue with or restart execution or simulation, the present graphics
is erased and the next starts with the new values.
The zoom function cannot be executed during execution or simulation of the part. In this case,
interrupt the execution or simulation by pressing
