background image

English

7 EN 

BEFORE YOU START

Groups

•  Hook up the 

¿

lter holders to the groups (without coffee).

•  Let each group dispense water for about a minute.

Hot Water

•  Run the water replacement as indicated in the section "

Chan

J

in

J

 the 

Z

ater in the 

E

oiler

". 

Steam

 (also with Autosteam)

•  Dispense steam from the nozzles for about a minute, using the appropriate buttons.

ON THE JOB
Steam dispensing 

(also with Autosteam)

•  Before heating the beverage (water, milk, etc.), open the steam nozzle for at least 3 seconds 

and let the steam escape so that the condensation is eliminated.

Coffee dispensing   

   

•  If the machine has not been used for more than an hour, before making coffee, dispense about 

100 cc and discard the liquid.

Hot water dispensing

•  If the machine has not been used for more than an hour, before using the hot water, dispense 

about 200 cc and discard the liquid.

Cleaning the coffee circuits

•  Please read the speci

¿

c section in the user’s manual to learn how to clean these circuits.

WARNING

: BEFORE YOU START OPERATING THE MACHINE, WASH THE INTERNAL 

COMPONENTS FOLLOWING THE INSTRUCTIONS INDICATED BELOW. 
THESE STEPS MUST BE REPEATED AT LEAST ONCE A DAY AND WHEN THE 
MACHINE HAS NOT BEEN OPERATED FOR MORE THAN 8 HOURS.

6.   Rules for the worker operating the machine

02_EmblemaR_1442.indd   7

21/10/2014   09:41:26

Summary of Contents for Emblema R
































Reviews: