32
36
35
25
37
33
37
21
10
13a
13b
13c
A
English
13 EN
Scalding hazard!
Use the appropriate
insulating devices (
A
) to move the water and
steam wands.
13. Drinks distribution - coffee
Remove the
¿
lter carrier (
21
or
25
), clean it of the used
coffee grounds and re
¿
ll it with 1 or 2 doses of ground
coffee, according to the
¿
lter carrier used.
Uniformly press the ground coffee in the
¿
lter holder by
means of the pressing disc of the grinder.
Remove any coffee grounds from the edges of the
¿
lter.
Insert the
¿
lter carrier (
21
or
25
) to the group, locking it
¿
rmly in place. Position the cup (or cups) under the spout
(or spouts) of the
¿
lter carrier (
21
or
25
).
A version
Press the coffee distribution key (
32, 33, 35
or
36
)
corresponding to the desired dose. The corresponding
led lights up, the coffee will be issued and will stop
automatically upon completion.
Press the continuous/STOP distribution button (
37
) for a
continuous distribution.
The distribution, both dosed and continuous, may be
interrupted at any time by pressing the continuous/STOP
key (
37
).
S version
Press the coffee dispensing button (
37
) and dispense.
When the desired dose is obtained, press button (
37
) again
to stop dispensing.
14. Drinks distribution - hot water
After having positioned the appropriate container under
the hot water nozzle (
10
), distribution is made in two ways.
DOSED FUNCTION
Press one of the hot water distribution keys (
13a
or
13c
).
The corresponding led will light up, hot water will be issued
and will stop automatically upon completion.
The distribution may be interrupted at any time by pressing
the previously active key again (shown by the lighted led),
or the Stop button, continuous hot water (
13b
).
CONTINUOUS FUNCTION
Press the hot water distribution key (
13b
).
Hot water will be issued continuously until the hot water
key (
13b
) is pressed again to stop this function.
In continuous function the progrmmed dosed in the key is not
changed.
Do not remove the coffee
¿
lter before the
coffee dispensing has completed.
02_EmblemaR_1442.indd 13
21/10/2014 09:41:30
