PROGRAMMATORE ELETTRONICO PER MOTORIDUTTORE DARDO 424
SU CANCELLI A BATTENTE A DOPPIA ANTA
Elpro 42
I
8
PROGRAMMAZIONE SENZA RITARDO DELLE ANTE
Premere e tenere premuto per
5 secondi
il pulsante di programmazione
( no a che il led LP non inizia a lampeggiare): si entra così in
programmazione.
Regolare i trimmer della velocità, della forza e della pausa, a seconda delle reali esigenze e della tipologia dell’anta da aprire, sempre nel
rispetto della curva delle “Limitazioni delle Forze secondo normativa EN 12453 e EN 12445”.
IMPORTANTE: dopo ogni variazione dei trimmer della velocità e della forza è necessario eseguire sempre una nuova
programmazione.
Dare un singolo impulso: il led LP rimane
sso acceso, quindi attendere.
Dopo
10 secondi
il led LP si spegne e le
ante si aprono contemporaneamente no
alla battuta di apertura.
In battuta di apertura il led LP si accende e
rimane sso acceso:
attendere 10 secondi
circa (NON premere il pulsante)
. Il led LP si
spegne e le ante si muoveranno in chiusura
no alla battuta.
Led LP spento e lampeggiatore spento
indicano che la programmazione è
terminata.
1 impulso
LP
LP
LP
LP
1)
2)
3)
4)
ATTENZIONE: tutti i led verdi devono essere accesi, altrimenti controllare tutti i collegamenti degli accessori, soprattutto i contatti
NC delle sicurezze installate (contatto delle fotocellule interne ed esterne, contatto di stop, coste di sicurezza, ...).
PROGRAMMAZIONE SENZA RITARDO DELLE ANTE
(quando le due ante del cancello si aprono contemporaneamente e per installazioni con un solo motoriduttore su cancelli ad una sola anta).
Eseguiti tutti i collegamenti elettrici al programmatore (secondo le istruzioni ad esso allegate), con tutti gli accessori di comando e sicurezza richiesti,
si procede con la programmazione.
!
REGOLAZIONE DELLA VELOCITÀ NELLA FASE DI RALLENTAMENTO
A cancello fermo regolare il trimmer della velocità e
dare un comando apre/chiude/radio per apprezzarne
il funzionamento.
Di fabbrica, la velocità a ne rallentamento, è pari al 25%
della velocità massima.
È possibile regolare la velocità nale di rallentamento tramite la seguente procedura in modo da ottenere, a seconda delle necessità, un appoggio
ancora più dolce delle ante o viceversa per un appoggio più energico, per favorire un eventuale aggancio dell’elettroserratura.
1)
2)
3)
6
ON
: attivo la regolazione della velocità
nella fase di rallentamento
DIP-SWITCH N° 6:
Trimmer
velocità
20%
velocità
massima
70%
velocità
massima
50%
velocità massima
6
OFF
: disattivo la regolazione e salvo la
velocità desiderata nella fase di
rallentamento
DIP-SWITCH N° 6:
4)
Il trimmer ora imposta la velocità massima durante la
corsa, quindi regolare come impostato prima del
punto 2.
ATTENZIONE: tutte le modi che sulle velocità verranno eseguite al successivo comando di apre/chiude/radio.
Eseguire quindi la regolazione delle velocità e dare un comando apre/chiude/radio per apprezzarne il funzionamento.
!
5 secondi
LP
LP
LP
LP
LP
Summary of Contents for Elpro 42
Page 34: ...Elpro 42 34 ...
Page 35: ...Elpro 42 35 ...