English
10
COMBI 787
Oil-hydraulic underground operator
for swinging gates
LEFT GATE
COMBI 787
ON THE LEFT GATE
LEFT GATE
30 - 40°
30 - 40°
RIGHT GATE
COMBI 787
ON THE RIGHT GATE
RIGHT GATE
Combi 787
Combi 787
FITTING COMBI 787's INSIDE THE FOUNDATION BOXES
Put the Combi 787's inside the foundation boxes and fix them by the 4 stud bolts:
no difference between Combi 787
right-hand or left-hand
.
Tighten the 4 hexagonal studs very hard
.
2
FITTING THE OPERATING ARMS ONTO THE SQUARE SHAFT
3
NOTE WELL: FIT THE OPERATING ARM AND MAKE SURE THE RESPECTIVE NOTCHES ON THE SQUARE
SHAFT AND OPERATING ARM ARE PERFECTLY ALIGNED:
- COMBI 787 INSTALLED ON THE RIGHT TO MATCH THE NOTCH MARKED DX (right)
- COMBI 787 INSTALLED ON THE LEFT TO MATCH THE NOTCH MARKED SX (left)
Hydraulic release: turn the
lever for manual operations,
then lock again.
Rotate the shaft about 30-40° in the direction opposite to the opening of the gate (towards the outside), manually with Combi 787
released, or electrically by providing a temporary power connection setup.
!