E
n
g
li
sh
Pic. 12
Pic. 13
!
NOTE WELL: Depending on which side of the gate Aproli 280 Batt is mounted, on the left or on the right,
The function of the
red
and
green
adjusting screws changes in relation to open and close control.
On default, Aproli 280 Batt comes factory pre-set for installation on the left side of the gate.
ADJUSTING THRUST FORCE
In order to adjust thrust power in opening and closing, turn the
respective adjusting screws under the cover as indicated (Pic. 13).
SPEED CONTROL (OPTIONAL VERSION WITH FLOW
REGULATOR)
At the time of the order it is possible to require that
Aproli 280 Batt be fitted with flow regulators: this
device allows for speed control in opening and closing,
specially with heavy or infilled gate leafs without any
openings.
Adjusting is by tightening or loosening the devices as
indicated in Pic. 14.
FIXING THE GATE STOP IN OPEN POSITION
IMPORTANT: it is recommended that ground gate stops be always
provided in open and closed gate positions.
Anyway, for those situations where a gate stop in open position cannot
be fixed on the ground, Aproli 280 Batt comes with an accessory (
open
gate stop
), adjustable, to be mounted on to the operator under the gate
post fixing back bracket for the operator arm to stop against it.
Once satisfied it is adjusted to the required distance, tighten M14 locknut
and fit the cover and fasten it by M8 nut (Pic. 12).
In closed gate position, tough, a gate stop fixed to the ground is to
be provided.
Adjust the gate stop for the gate to open and stop as required, then
tighten hard the locknut.
Stop in open position
M14 locknut
Fixing
stud bolt
Gate stop cover
righ- and left-hand versions
M8
GREEN screw:
Clockwise = + force
Anticlockwise = - force
RED screw:
Clockwise = + force
Anticlockwise = - force
Aproli 280 Batt installed on the left:
RED screw controls the force in opening
GREEN screw controls the force in closing
Aproli 280 Batt installed on the right:
RED screw controls the force in closing
GREEN screw controls the force in opening
Pic. 14
Flow regulator:
Clockwise = - speed
Anticlockwise = + speed
External oil-hydraulic operator with articulated arm
for swinging gates mounted on large pillars
APROLI 280 Batt
Flow regulator:
Clockwise = - speed
Anticlockwise = + speed
9