GENERAL DESCRIPTION OF THE PRODUCT
Aproli 280 Batt is an oil-hydraulic operator for external application, fitted with an articulated arm, it is studied to open and close
swinging gates mounted on pillars of significant dimensions. Aproli 280 Batt is designed in a single version as it can be indifferently
mounted on the right or left side of the gate (view from inside ).
it is an oil-hydraulic product and has all the advantages that such systems can offer, such as reliability, smooth movements, adjustable
thrust power being controlled by low and high pressure valves, and flexibility as it can suit most types of swinging gates.
Quick and easy to install. The pressure cast aluminium back bracket is fastened to the gate pillar by means of expanding bolts and
provides support to the drive assembly, made of galvanized steel and aluminium and fixed by screws.
The pivoting shaft is made of hardened steel to ensure long lasting reliability over the time.
The driving arm is made of pressure cast aluminium and has the advantage that its last section can be adjusted to three different
steps to meet any installation requirements, even with pillars of large dimensions.
The operator comes in two options, fitted with a hydraulic locking valve or non locking ie. reversible (in this case an electric lock is
to be fitted to the gate).
it is also possible to have Aproli 280 Batt in the special option with flow regulator. This is an incorporated device that can control
the speed of the gate (in opening and closing movements independently) all along the gate travel, recommended for those heavy
gates whose inertia is significant.
For Aproli 280 Batt to work as an automatic system it is required that an electronic control box type Elpro be fitted externally in a
sheltered place. Operations can be selected to be either fully automatic or semiautomatic (closing by pulse), depending on the
user’s requirements.
The system is designed to work together with accessories that ensure proper operations in full safety and reliability, making it
suitable for any public or private applications.
A polycarbonate cover protects the inner drive unit, and a flap allows only authorized access to the control valves by means of a
coded key for the following operations: high and low pressure adjustment, manual release and removal of the cover.
E
n
g
li
sh
3
1 - Back bracket for gate post fixing
2 - Motor pump-jack assembly
3 - Cover with lockable flap for manual realasing by coded key
4 - Complete arm assembly: it can be used for both right and left applications
5 - Incorporated stop assembly for Aproli 280 Batt installed on the left
6 - Incorporated stop assembly for Aproli 280 Batt installed on the right
7 - Arm bracket for gate fixing
COMPONENTS
Pic. 1
External oil-hydraulic operator with articulated arm
for swinging gates mounted on large pillars
APROLI 280 Batt
2
3
4
4
6
1
7
5
