G4)
Check the Set-Up Sheet and Tuning Section
again, then install the shock bottom with the
4-40 cap head screw you took out. Don’t
forget the bushing! Here we are using the #2
hole.
G5)
We will install the nerf bars on the opposite side – right bar on the left side,
left bar on the right. Use the 4-40 X 1/2” flat head screws and 4-40 locking
nuts.
BODY MOUNT & BUMPER
G6)
We will turn the body mount around, so we must cut off the back of it.
Always wear safety goggles when operating a rotary tool.
