FRONT END & BUMPER
C3)
Place the complete SC10 front end on the nose piece so the AE top deck
(AE9566) is above the front decks and ready to screw into the stand-offs.
It doesn’t matter what order you use to screw in the front end assembly;
we find it easiest to put the two 4-40 X 5/8” flat head screws you saved up
from under the nose piece first because this holds it all together. Finger
tight for now.
.
C4)
Install the three bolts to hold the top deck to
the front deck & standoffs and to the nose
piece. Then put final torque on the two rear
top deck bolts from C2.
C5)
Put the front bumper on the truck using the
two 4-40 X 5/8” flat head bolts you saved.
