A outer cable must be replaced only by a specialist.
The trafo-box cannot be repaired and must be replaced.
When changing bulbs, make sure that the maximum wattage (W) and the voltage (V) of the replacementbulb
conform to the transformer or lamp.
Information for furniture with electrical connection and lighting:The electrical device must
be connected by a qualified electrician in compliance with VDE 100, Part 701!
Instructions for mounting and use:
Dear customer,
Congratulations for purchasing our bathroom furniture, which will provide you with long-la-
sting pleasure, if you will follow our instructions for cleaning and maintenance:
ATTENTION ! Before mounting please check the product to see if any damage has been
caused during transportation. Please note that we cannot accept any complaints regarding
damage after the product has been mounted.
Keep the packaging material and small parts out of the reach of children.
Please polish the furniture and the mirror with a moist cloth, only use mild detergents.
Please mind the instructions of microfibre cloths. Unsuitable microfibre cloths can do severe
damage to the fronts.
No alcoholic, scratching or aggressive cleansing agents (glass detergents).
Please wipe the furniture always with a dry cloth to avoid any damages to the material (swelling)
or of the mirror surface (blind stains) because of remaining water.
Do not use steam cleaner. The use of steam cleaners leads to swelling of the wood and ruins the
furniture.
All fittings of the basin plate in contact with other cupboards and walls or to the base itself have
to be sealed with silicone or other appropriate sealing materials.
Protect your furniture – if in contact to shower or tub – by a shower severance.
Please note that we cannot accept any complaints regarding damages of extraordinary effects by
water or humidity. Our bathroom furniture is meant for use at regular bathrooms conditions,
including shorttime air humidity of 90 % (no sauna).
The included hooks and dowels are only suitable for walls of masonry, bricks MZ20 hole bricks
HLZ20 or concrete B25.
5BB0800000_re S3/8 46/14
GB
Disconnect the power supply before changing bulbs. In case of a fixed installation the electrical
connection has to be equipped with a seperating appliance (f.ex. switch)
For halogen lamps: Always use a cloth when handling bulb or inserting into the socket!
For halogen lamps: bulb becomes extremely hot (up to 350 ° C), before changing the buld or
adjustment of the lamp allow to cool down the bulb !
Protect lamp from moisture or wetness during
For halogen lamps with protective glass: A borken protective glass must be replaced immediately!
350°C
Halogene bulb with protection against bursting.
Minimum distance to the illuminated surface f.ex. 10 cm
Protected isolation, protection class I, appliance with protected connection (yellw/green)
For direct installation on heavy or normal infallable materials.
Suitable for installation in furniture, but not on normal inflammable surfaces.
This lamp is not suitable for cool beam lamps.
10 cm
F
M
M
Cool
Beam
The average life time of our LEDs is 15,000 hours. The optical power is around 70% of the exit optical
power after the mentioned life time.
Avoid a longer direct visual contact with the LED light source since otherwise damage to the eye could
arise.
