DO NOT TELESCOPE WITH THE JIB IN ITS SEAT, THIS WILL
CAUSE DAMAGE TO THE PAINT ON THE MAIN BOOM.
7.
Mounting of basket.
Swing away jib for controlpanel to allow mounting of basket.
Mount the basket, by sliding it in over the two bars at the
basket mount, and make sure the basked is locked to the
mount by the vertical locking mechanism in the bottom of
the basket.
8.
The basket is now mounted and the platform is ready for use.
9.
After use of the platform, the outriggers can be stowed by
following the above instructions in reverse row.
10. If 230 V A C direct power is not available, it is possible to
work without being connected to the 230 V A C outlet, but
to avoid discharging the batteries the battery charger shall
if possible always be plugged in.
WHEN MOUNTING THE BASKET MAKE SURE THAT THE
BASKET IS LOCKED PROPERLY. A BASKET NOT LOCKED
PROPERLY CAN FALL OF AND CAUSE INJURY OR DEATH.
WHEN THE SPIDER IS USED FOR WELDING WORK THE
SPIDER HAS TO BE UNPLUGGED AND THE
OUTRIGGERS HAVE TO BE PLACED ON RUBBER MATS.
3.2 OPERATING THE PLATFORM
1.
Read the complete manual and the safety instructions, and
make sure to perform the daily safety check before
attempting to use the platform.(Section 3.6)
2.
Set up the Platform as per section 3.1.
3.
Enter the basket (max. lb. 440/200 kg.)
4.
The platform can now be operated. The main boom should
be horizontal to the ground when entering the basket.
The platform shall be used by personnel to gain access i.e. for
maintenance and cleaning operations.
The platform is not isolated for work on or near high voltage
installations, and the platform shall not be used for any other
purpose than to give access for personnel. The platform shall
not be used as a crane, and big objects shall not be placed in
the basket or on the boom, i.e. big signs or windows.
Contact between platform or basket and fixed objects i.e.
buildings shall be avoided.
IMPORTANT NOTICE
BEFORE ENTERING THE BASKET, IT MUST BE
CONTROLLED THAT THE BASKET IS PROPERLY LOCKED
TO THE BASKET SUSPENSION. DO NOT ATTEMPT TO USE
THE PLATFORM WITHOUT THE USE OF A SAFETYBELT.
THE SAFETYBELT MUST BE PROPERLY LOCKED IN THE
FIXING POINT IN THE BUTTON OF THE BASKET.
INCORRECT OPERATING PROCEDURES CAN BE
COURSE FOR INJURY OR DEATH.
THE BASKET IS NOT ISOLATED FOR WORK ON OR
NEAR HIGH VOLTAGE INSTALLATION.
WORK IN THE ASSURED CLEAR DISTANCE FROM
ELECTRICAL POWER LINES.
FAILURE TO DO SO CAN RESULT IN ELECTROCUTION
CAUSING INJURY OR DEATH.
The platform is operated by the two joysticks and a platform
enable button for two-handed control. (option)
DO NOT ATTEMPT TO CLIMB OUTSIDE THE BASKET
WHEN IT IS LIFTED OFF THE GROUND.
ALWAYS MAKE SURE YOU USE A SAFETY BELT AS
REQUIRED BY YOUR EMPLOYER OR THE
APPROPRIATE FALL PROTECTION. FALLING FROM AN
AERIAL PLATFORM CAN CAUSE INJURY OR DEATH.
FALLING DOWN FROM AN AERIAL PLATFORM CAN
CAUSE SERIOUS INJURY OR DEATH.
DO NOT ATTEMPT TO CLIMB ON TOP OF THE BASKET
OR TO USE A LADDER OR THE LIKE FROM THE BASKET.
OVERLOADING THE PLATFORM CAN CAUSE
SERIOUS INJURY OR DEATH.
6
