Fac F 300 TSV, Installation, Operating And Service Instructions, Page: 8 / 54

MANUFACTURER’S WARRANTY AND LIABILITY
The manufacturer’s warranty covering the good functioning of the machines and their
compliance to the service for which they have been designed depends on the correct
application of the instructions contained in this manual.
The Manufacturer assumes no liability either direct or indirect deriving from:
• Failure to comply with the instructions contained in this manual;
• Use of the machine by personnel who has not read or fully understood the content of
this manual;
• Use not complying to the specific norms currently applicable in the country of installation;
• Unauthorized modifications and/or repairs;
• Use of non original accessories or spare parts;
• Exceptional events.
PLATES – CONFORMITY MARKS
The machines are produced in conformity with the European Directives in force and their
subsequent amendments. All the parts making the machine meet the terms of the Directive
and the CE marks have been applied to substantiate this compliance.
The plate carrying the Manufacturer’s data, the machine data and the CE mark are applied
onto the machine base under the blade guard tie-rod knob.
This plate must never be removed and must always be legible.
In case of wear or damage, the user must replace it.
TYPE
N.
/2011
KW. V- Hz.
CE USO PROFESSIONALE
M A D E I N I T A L Y
ENVIRONMENTAL CONDITIONS OF USE
• Temperature ............................................................................... from -5 °C a + 40 °C
• Relative humidity ........................................................................ max 95%
IPX1
6/50