Fac F 300 TSV, Installation, Operating And Service Instructions, Page: 7 / 54

FOREWORD
SCOPE OF THIS MANUAL
This manual contains all the necessary information to install, use and service the gravity
slicers for food (please see models in paragraph “Technical Description”). The scope of
this document, hereinafter the “manual”, is to permit users, and especially end users, to
take all the cautions and provisions possible for using this machine safely and for a long
time.
GENERAL INFORMATION
LIMITS OF USE – SAFETY NORMS
These machine were designed and built to slice foodstuff in compliance to the norms
of the CE 2006/95/EEC, 93/68/EEC, 2006/42/EEC, 2002/72/EEC, 2004/108CE, REG
1935/2004/EEC, 2002/95/CE (RoHS) and to the following regulations EN1974, EN
ISO12100-1, EN ISO12100-2, EN 294, EN60204-1, EN60335-1, EN60335-2-64.
GENERAL SAFETY REGULATIONS
The slicers must be used only by suitably trained personnel. Furthermore, this personnel
must have read this manual carefully.
In particular, please comply to the following instructions:
• Install the machine according to the instructions contained in the “Installation” section;
• Do not remove the transparent protections, do not modify nor exclude the mechanical
and electrical safety devices;
• Do no use the machine with improvised connections, or provisional or non insulated
cables;
• Check the power cable and gland plate on the machine body regularly and when
necessary have them replaced by qualified personnel;
• In case of anomalies, defective operation, incorrect movement, unusual noise, etc stop
the machine immediately;
• Before cleaning or servicing, disconnect the machine from the mains;
• Always use scratch-proof and non-slip gloves during cleaning or maintenance;
• Lay or remove the goods to be sliced on the sliding plate only when the latter is
completely pushed back and the thickness control knob positioned to 0;
• To move the carriage tray when slicing, use the handle or the product grip handle;
• For extraordinary maintenance (to replace the sharpener wheels, the blade, or others)
please contact the manufacturer or qualified and duly authorized personnel;
• Avoid running the slicers with no product on it;
• The slicers are equipped with a ventilated motor.
WARRANTY: 2 YEARS except for the electrical parts
5/50