FABtotum Personal Fabricator, User Manual

Page: 5 / 123

FABtotum Complete Manual
www.fabtotum.com
| 5
purchased is sold on the assumption the purchaser will make his own tests to determine the quality and suitability of the
product. Manufacturer expressly disclaims any and all liability for incidental and/or consequential property damage arising
out of the use of this product. No information provided shall be deemed to be a recommendation to use any product in
conflict with any existing applicable law. Read the Data Sheet before handling product.
WARRANTY
Warranty will be void if the product is modified or altered in any way as well as it is opened in parts that should be kept
closed (i.e. head, rear panel, left side panel, etc …).
Operating the unit outside its specifications or purposes will also void the warranty.
Using unofficial filaments, accessories, consumables or any third party products as well as following unauthorized
maintenance procedures is done at the owner’s discretion and risk and may also cause damage to the unit, for which the
manufacturer will not be held liable.
The product and its accessories must be kept in reasonable conditions. Do not dispose of the shipping box and packaging
material.
The warranty does not cover damages caused by misuse, incorrect use or commands, mishandling or damages elicited by
the use of third party accessories.
The warranty does not cover consumables such as: head thermistor, head heating cartridges, milling chuck, SD card, fans,
nozzle, 4th axis feeder gear, hot-plate’s pogo pins and all removable connectors and PCBs.
Legally applicable warranty period(s)
2 years for natural persons and businesses in the European Union
6 months for natural persons and enterprises in the rest of the World
The Warranty period starts from product’s delivery date for online sales or from purchase date for all other acquisitions.
Warranty rights must be exercised before the end of the warranty period and only within 14 days of discovering a factory
fault.
Repairs or replacement of the product and its components do not extend warranty period nor renew warranty on the
replaced parts.
Software license and warranty
FABUI is an Open Source and all-inclusive software, except where otherwise stated and it is supplied under Creative
Commons BY-SA-NC rules (read more here:
https://creativecommons.org/licenses/by-nc/3.0/legalcode ).
All relevant documentation is released under the following Creative Commons license:
(CC) Attribution-NonCommercial-Share Alike 3.0 Unported (CC BY-NC-SA 3.0).
You may find a copy here:
http://creativecommons.org/licenses/by-nc-sa/3.0/
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-
INFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS WITH THE SOFTWARE.