FabiaTech FX5612 User Manual Download Page 10

Page: 10 / 68

FabiaTech Corporation

Packing List

Upon receiving the package, verify the following things. Should any of the

mentioned happens, contact us for immediate service.

•

Unpack and inspect the FX5612 package for possible damage that may
occur during the delivery process.

•

Verify the accessories in the package according to the packing list and see

if there is anything missing or incorrect package is included.

•

If the cable(s) you use to install the FX5612 is not supplied from us, please

make sure the specification of the cable(s) is compatible with the FX5612

system.

Note: after you install the FX5612, it is recommended that you keep the diskette or

CD that contains drivers and document files, and keep the document
copies, or unused cables in the carton for future use.

The following lists the accessories that may be included in your FX5612 package.
Some accessories are optional items that are only shipped upon order.

•

One FX5612 embedded system.

•

One AC to DC power adapter and 1 AC power code.

•

One pack of 2.5” hard disk installation kit with fixed screws and 2-pin

apartable terminal block.

•

One compact disc includes software utility.

Summary of Contents for FX5612





































































Search results

Summary of Contents for FX5612

Reviews:

Related manuals for FX5612

Brands by name

Popular brands

FabiaTech FX5612, User Manual

Search results

Summary of Contents for FX5612

Reviews:

Related manuals for FX5612

Brands by name

Popular brands