FabiaTech FX5612 User Manual Download Page 9

Page: 9 / 68

FabiaTech Corporation

Specifications

Processor Board –

Celeron-M 600MHz or Pentium-M 1.4GHz CPU with 256MB SDRAM.

I/O Outlets –

Two 100/1000 base-TX Ethernet LAN ports.

Two RS-232 ports with DB9 and One parallel port with DB25 port.

One CRT and one PS/2 compatible keyboard and mouse interfaces.

Four USB ports (V2.0).

One Audio Line-Out and Microphone-Input

One Mini PCI Socket for Wireless LAN module.

One DC-In plug connector with power switch.

One Push button reset switch.

One power LED, One HDD/CF access LED, and Six status LED’s.

Storage Bay-

One Compact Flash slot with plug-in aperture and cover,

One 2.5" hard disk space.

Power requirement –

12~+24V DC, 27VA minimum with 2.5” HDD and 19V input

Voltage.

FX5612:A+12~+24V DC, 36VA minimum with 2.5” HDD and 19V input
Voltage.

Dimensions -

178.0mm(D) x 249.0mm(W) x 72.0mm(H)

Summary of Contents for FX5612





































































Search results

Summary of Contents for FX5612

Reviews:

Related manuals for FX5612

Brands by name

Popular brands

FabiaTech FX5612, User Manual

Search results

Summary of Contents for FX5612

Reviews:

Related manuals for FX5612

Brands by name

Popular brands