FabiaTech FX5502, User Manual

Page: 27 / 62

FabIATech Corporation
22
ADVANCED CMOS SETUP
This section describes the configuration entries that allow you to improve your
system performance, or let you set up some system features according to your
preference. Some entries here are required by the CPU board’s design to remain
in their default settings.
Quick Boot
This field is used to activate the quick boot function of the system. When set to
Enabled,
1. BIOS will not wait for up to 40 seconds if a Ready signal is not received from the
IDE drive, and will not configure its drive.
2. BIOS will not wait for 0.5 seconds after sending a RESET signal to the IDE drive.
3. You cannot run BIOS Setup at system boot since there is no delay for the Hit, Del.
To run Setup message.
Available Options: Disabled, Enabled
Default setting: Enabled