FabiaTech Corporation
Chapter 2 Hardware Installation
This chapter introduces the system connectors and guides you to apply them for
field application.
Before Installation
Before you install the system, make sure you follow the following descriptions.
1.
Before removing the cover, shut down the operation System and disconnect
power switch to off and unplug AC cable.
2.
Install or unplug any connector, PCIe mini card, Compact Flash, and hard disk
be sure that the power is disconnected or power switch to off from the system.
If not, this may damage the system.
3.
The ESD (Electricity Static Discharge) may be created from human body that
touches the board. It may do damage to the board circuit.
4.
When using the screwdriver on screws, before make sure the screws size and
type, if uses the not correct unscrews or screws of system, the screwdriver may
break the screws.
7