FabiaTech FP8082 Series User Manual Download Page 57

Page: 57 / 81

FabiaTech Corporation

Chapter 4 Software Installation

The enclosed CD diskette includes FP8082 VGA, Audio, System, Touch Screen and

LAN driver. To install and configure you FP8082 system, you need to perform the

following steps.

System Driver

WIN 2000/XP Driver

Installs 945GSE Chipset, IRQ Routing, USB, AGP Driver and ISA IDE Bus Master Drive.

Step 1: To install the 945GSE driver, insert the CD ROM into the CD ROM device,

and enter DRIVER>SysChip>ICH7.

Step 2:  Execute Setup.exe file.
Step 3:  The screen shows the SETUP type. Press any key to enter the main menu.
Step 4:  As the setup is completed, the system will generate the message as

follows.

Yes, I want to restart my computer now. Installation is done!
No, I will restart my computer later.

System must be restart then complete the installation.

Note: In the Syschip>ICH7 directory, a Readme.txt file is included to provide

installation information.

Summary of Contents for FP8082 Series


















































































Search results

Summary of Contents for FP8082 Series

Reviews:

Related manuals for FP8082 Series

Brands by name

Popular brands

FabiaTech FP8082 Series, User Manual

Search results

Summary of Contents for FP8082 Series

Reviews:

Related manuals for FP8082 Series

Brands by name

Popular brands