Faber SERENE C11, Installation Manual

Page: 6 / 24

5 < < < <
UK IRL
2 Safety and general information
Before installation, ensure that the local distribution conditions (identification of the type of
gas and pressure) and the adjustment of the appliance are compatible.
This gas appliance is factory set and can not be adjusted.
This appliance does not contain any component manufactured from asbestos or any asbestos
related products.
Ventilation
This appliance is room-sealed and doesn't require purpose provided ventilation.
Never use the appliance if it has a broken glass.
General safety
It is the law in the UK that all gas appliances, are installed by a competent person in
accordance with the Gas Safety (Installation and Use) Regulations (as amended), the
relevant British Standards for Installation work, Building Regulations, Codes of Practice and
the manufacturers instructions.
Always use an additional guard if there are elderly, infirm or children in the same room of
the appliance.
The installation should also be carried out in accordance with the following where relevant:
•
BS5871 Part1
•
BS5440 Parts 1 & 2
•
BS1251
•
Building Regulations Document J (as applicable)
•
Building Regulations and Standards issued as relevant by the Department of the
Environment or the Scottish Development Department
•
In the Republic of Ireland installation should be carried out in accordance with IS813,
ICP3, IS327, Building Regulations, Codes of Practice, the manufacturers instructions
and all other regulations in force
Failure to comply with the above could leave the installer liable to prosecution and
invalidate the appliance warranty.