Faber SERENE C11, Installation Manual

Page: 14 / 24

13 < < < <
UK IRL
6 Handing over (final check and customer briefing)
ƒ
Instruct the customer on the full operation of the appliance and the remote control,
including replacement of batteries
ƒ
Advise the customer how to clean the appliance including the glass
ƒ
Hand over these instructions including the user guide to the consumer
ƒ
Recommend that the appliance should be serviced by a competent person at least
once a year
7 Servicing
To ensure safe, efficient operation of the appliance, it is necessary to carry out routine
servicing at regular intervals.
It is recommended, that the fire is inspected/serviced by a competent person at least once a
year.
Important: Turn off the gas supply before commencing any servicing. Always test for gas
soundness after refitting the appliance!
7.1 Routine annual servicing
ƒ
Clean (if necessary):
a. the pilot system
b. the burner
c. the combustion chamber
d. the glass
ƒ Check the log layout and replace the embers (if applicable)
ƒ Do the functional test as described in chapter 5
ƒ Check the flue system and terminal for damage and soundness (visual inspection)
7.2 Cleaning the glass
Depending on the intensity of use, you can get material deposits on the glass. Remove the
glass (see chapter 4.3).
Remove the deposit with a dry cloth or if necessary, special ceramic glass cleaner (ceramic
hob cleaner).
Attention:
Make sure that the logs have been placed correctly before fixing the glass.
Before placing the glass: check the glass sealing rope is in good condition and makes an
effective seal. Be sure that there are no fingerprints on the glass. It is not possible to
remove those prints after you burn the appliance for a while (they are burnt in). Place the
glass in front of the appliance and fix the glass frame or use the glass clamps.