Faber Respect OC, Installation Manual

Page: 17 / 24

16 < < < <
L
Search in the table at TVH and THL and enter the value that is found
found value
Is the detected value is a number check whether the completed STL is higher or equal to the
value in the table.
Is the found value x a is the situation is not possible,
Solution: change the TVH or THL
STL value is less than as specified in the Table installation is Not possible
Solution: Start length to low see for the minimum length in the top row of the table
Results
Restrictor size = Found value for the comma.
mm
Extra information = Found value behind the comma.
Mark
which is applied
Install the Air restrictor plate , see installation manual 0,1
Install adapter 100/150 direct on top the fire. 0,2
In case of wall terminal install adapter 100/150 before the
last bend, in case of roof terminal just before the terminal
0,3
In case of roof terminal (always size 100/150) install the
100/150 adapter just before the terminal. Wall terminal
130/200
0,4