NOTICE :
- Please read this instruction manual carefully before use.
- Please make sure the voltage marked by the product meets the local’s before connecting to
power.
- Please check the power cord regularly. Do not use this product again if the plug, power cord,
or the product itself is damaged.
- Always unplug the appliance from the power supply before cleaning and when not in use.
- Do not block air intake and exhaust ports at the same time during use, otherwise the blower
may overheat.
- Do not place the product in humid, high temperature and or high-pressure environment to
prevent the components from being damaged.
- To ensure safety, it is recommended to install a leakage protector in the bathroom’s curcuit.
- Never use accessories or parts from other manufactures or the warranty will be void.
- Please keep this item far away from places with water. Do not use this product near a bathtub,
spray head, sink, or other container containing water. If the product accidentally falls into the
water, immediately unplug the power cord and do not put your hands in the water. And it needs
to be checked by a professional maintenance staff before using again.
- Unplug it immediately after using it in the bathroom. It is still dangerous to be close to the
water even if the power is off.
TROUBLESHOOTING AND ANALYSIS :
IMPORTANT SAFETY INSTRUCTIONS
Malfunction
Possible Reason
Solutions
Can’t start or interrupt continuously
1.
The power cord is not plugged in
well.
2.
The power cord is disconnected.
3.
Poor contact of the switch.
1.
Plug in the socket.
2.
Ask the professional to replace the power cord.
3.
Ask the professional to replace the motor.
4.
Contact us.
overheat
1.
The air inlet is blocked.
2.
The motor is not normal.
1.
Please clean the air inlet regularly.
2.
Send the seller or the company to repair or get a
replacement.
The wind is obviously less, and the
temperature rises.
1.
Air inlet blockage.
2.
The motor is not normal.
3.
Diode damage.
1.
please clean the air inlet regularly.
2.
Send it to the seller or the company to overhaul.
The power cord’s temperature is too
high or the plug’s temperature is too
high. Sharply.
Power cord disconnection is poor.
1.
Ask the professional to replace the power cord.
2.
Contact us.
Does not work or does not respond after
the motor starts.
1.
Motor carbon brush wear abrasion.
2.
Motor damage.
1.
Please stop using and contact us.
There are noise and burnt smell.
Internal accessories are not normal.
Please stop using and contact us.
Noise when shaking or sharp friction
when starting up.
Internal support is broken and damaged.
Please stop using and contact us.
