Faber FABULA BK A90 RB, Instruction Manual

Page: 33 / 136

EN
3
33
USE
Control panel
Button Function LED button
A The button only works when the door is open.
Press Briefly = Turns the Lights On/Off at maximum intensity.
Press and hold for 2 Seconds = Turns the Courtesy Lights
On/Off.
B Only works with the Door Open.
Press briefly = Activates/Deactivates Delay mode, causing auto-
matic shutdown of the Motor and the Lighting system from any
speed with a 15’ delay. It is disabled by pressing the same button
again, turning the motor off or closing the door.
LED Button B + Button for the set Speed are lit.
Works both with the Door Closed and Open.
Press and hold for 2 Seconds = With the filter alarm triggered the
Filter Alarm is Reset . These indications are only visible when the
motor is turned off.
Fixed LED button:
Indicates the need to wash the metal grease filters.
The alarm is triggered after the Hood has been in
operation for 100 working hours.
Flashing LED button:
Indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters. The
alarm is triggered after the Hood has been in
operation for 200 working hours.
Works both with Door Closed and Open with Motor + Lights =
Off.
Press and hold for 4 Seconds = Enables/disables the Keyboard
lock .
All the LED buttons flash twice. During the Lock
the LED buttons light up in sequence.
C Only works with the Door Open.
Press briefly = Activates speed four .
Fixed LED button.
Only works with the Door Open.
Press and hold for 2 seconds = Enables/Disables the Intensive
speed. This speed is timed to run for 6 minutes. At the end of this
time the system will return to the speed set previously.
It is disabled by pressing the same button again, turning the motor
off or closing the door.
Flashing LED button.
D Only works with the Door Open.
Activates speed three .
Fixed LED button.
E Only works with the Door Open
Activates/Deactivates speed two .
Fixed LED button.
F Only works with the Door Open.
Press briefly = Activates/Deactivates speed one .
Fixed LED button.
Door Open or Closed
Press and hold for 2 Seconds = Enables/Disables the Activated
Charcoal Filter Alarm with the Motor turned off and no Filter
Alarm triggered.
LED button B flashes twice = Activated Charcoal
filter Alarm Activated.
LED button B flashes once = Activated Charcoal
filter Alarm Deactivated.
G Door Open
Press briefly = Turns the Motor off .
LED button goes out.
Door Open or Closed.
Press and hold for 2 Seconds with Motor and Lights Off =
Enables/Disables the Remote control .
LED button G + F flashes twice = Remote control
Enabled.
LED button G + F flashes once = Remote control
Disabled.
H Door Open = Closes the Door + Lights and Motor Off
Door Closed = Opens the Door + Lights and Motor On.
Warning : If the Door remains partially open for any reason, press
the Button to complete the opening or closing cycle.