Faber 110.0360.581, Instruction Manual

Page: 40 / 156

EN
4
0
40
REMOTE CONTROL (OPTIONAL)
This appliance can be commanded using a remote control, powered by a
CR2032 type 3 V battery (not supplied).
• Do not place the remote control near heat sources.
• Do not discard the batteries with normal waste, they must be put into
the specific containers.
Remote control panel
Warning..: The remote control receiver is deactivated when first supplied. To activate it, see the
paragraph Use .
Motor
Door Closed:
Pressed for approximately 2 Seconds: opens the door, turns the
motor on at speed 2 and turns the lights on at maximum intensity.
Door Open:
Brief pressure: Motor On / Off at speed 1.
Pressed for approximately 2 Seconds: Closes the Door and Motor +
Lights = Off
- -
- -
Light
Only with Door Open:
Brief pressure: Lights On / Off
Pressed for 2 Seconds: Courtesy lights On / Off
Intensive
Only with Door Open:
Activates the Intensive function
Delay
Only with Door Open:
Activates the Delay function
-
Only with Door Open:
Increases the working speed each time it is pressed.
-
Only with Door Open:
Decreases the working speed each time it is pressed.