IMPORTANT SAFETY GUIDE |
Your safety and the safety of others is very important.
SAFETY PRECAUTIONS
In order to help you make informed
decisions about safety, we have provided
the following warnings, safety precautions,
installation instructions, and other important
information to alert you to potential hazards
that could hurt you or others.
Please do a job safety analysis before each
task to identify potential hazards for your
situation and remove/protect against them.
Use own good judgment and take your time.
• Failure to observe the following warnings
and instructions provided in this manual
could lead to severe injury and/or death.
• For professional installation only. Careless
installation and/or operation can result in
serious injury, death, and/or equipment
damage. All liability for installation and use
rests with the user or consumer.
WARNINGS
• Always remove jewelry and wear eye
protection.
• Always use extreme caution when jacking
up a vehicle for work. Set emergency brake
and use tire blocks. Locate and use the
vehicle manufacturers designated lifting
points. Use jack stands.
• Always use appropriate and adequate care
in lifting components into place.
• Always ensure components will remain
secure during installation and operation.
• Always wear safety glasses when installing
this kit. A drilling operation will cause
flying metal chips. Flying chips can cause
serious eye injury.
• Always use extreme caution when drilling
a vehicle. Always disconnect power before
welding. Thoroughly inspect the area to
be drilled (on both sides of material when
possible) prior to drilling, and relocate any
objects that may be damaged.
Check packaged materials immediately upon
arrival to ensure that all listed parts are included
and undamaged.
Read and understand all warnings, safety
precautions, and instructions before installing
this product.
SENSORS FIELD OF VIEW MAY BE ALTERED WITH
USE OF THE REPLACEMENT BUMPER.
• Fab Fours, Inc. only approves installing this
product according to these written instructions
with the hardware provided. Failure to install
according to these instructions will invalidate
the warranty. This includes, but is not limited
to, using alternative installation methods,
hardware, or materials.
• This product is for off road use only.
• Always use extreme caution when welding
a vehicle. Thoroughly inspect the area to
be welded (on both sides of material when
possible) prior to welding, and relocate any
objects that may be a fire hazard. When
welding in a cab, make sure the interior
surfaces are covered (e.g., welding blanket)
and a fire extinguisher is at hand.
• Always use extreme caution when cutting and
trimming during fitting.
• Always tighten all nuts and bolts securely per
installation instructions.
• Always route electrical cables carefully. Avoid
moving parts, components that become hot,
and rough or sharp edges.
• Always insulate and protect all exposed wiring
and electrical terminals.
• Perform regular inspections and maintenance
on mounts and hardware.
