Figure 4
4. Using a 10mm socket wrench, remove the
three (3) screws attaching the black plastic
valance and inner fender to the lower portion
of the bumper cover on the inside of each side
of the vehicle. (Figure 4)
Figure 6
5. Using a 10mm socket wrench, remove the
two (2) screws at the bottom center of the
bumper cover. (Figure 5)
Figure 5
6. Using a 10mm socket wrench and a flat
head screwdriver, remove the screw and the
twist lock clip attaching the inner fender to the
bumper cover. (Figure 6)
