9
9. Using a 14mm socket wrench, remove the
three (3) nuts per side holding the impact bar
to the core support. (Figure 9)
Figure 8
Figure 9
7. Using a plastic body panel pry tool, remove
the six (6) push lock clips from the top of the
bumper cover. (Figure 7)
8. Using a plastic body panel pry tool, reach
inside the bumper cover and pinch the two (2)
clips holding the flare to the bumper cover and
pull out on the flare. (Figure 8) With the flares
pulled out of the cover remove the bumper
cover from the vehicle.
Figure 7
