6
2
3
1
2
3
4
5
6
0°
45°
90°
Adjust the tilt angle of the
detection field with the hex
key.
Lock the position of the mounting
bracket to avoid malfunctioning in
case of extreme vibrations.
If not, turn the sensor slightly
on its axis to find the correct
position.
WIRING
POSITIONING (3 SPOTS)
Activate the visible laser beams
by remote control. To turn off,
use same sequence. After 15
minutes the beams switch off.
Verify the lateral position of
the sensor. Make sure the laser
beam is visible on the opposite
pole.
Verify if both beams are on
equal height.
No test function:
connect red and blue wires to
power supply (no polarity)
POWER
POWER SUPPLY -
RELAY 1 - OPENING FIELD
RELAY 2 - SAFETY FIELD
NOT USED
GREEN
BROWN
WHITE
YELLOW
PINK
VIOLET
RED
BLUE
WHITE/RED
WHITE/BLUE
The sensor tests both relays.
Use the Power Supply Module
(24V DC, 0.75 A) if needed.
Power on with test
No detection
Detection
on both relays
TEST +
TEST -
