4
x
4
2
1
3
x
HOW TO USE THE REMOTE CONTROL
The access code is recommended for sensors installed close to each other.
After unlocking, the first LED
flashes red and the sensor
can be adjusted by remote
control.
If the red LED flashes quickly after unlocking, you
need to enter an access code from 1 to 4 digits.
X = NUMBER OF FLASHES = VALUE OF THE PARAMETER
= field width: 4.2 m
= field width is defined by teach-in
To end an adjustment session,
always lock the sensor.
Enter the existing code
ADJUSTING ONE OR MORE PARAMETERS
CHECKING A VALUE
RESTORING TO FACTORY VALUES
SAVING AN ACCESS CODE
DELETING AN ACCESS CODE
