+
-
+
-
+
-
+
-
6
ENGLISH
4 OPERATION IN STANDARD MODE (factory default)
Radio communication test push-buttons. Pressing one of these
push-buttons, the up movement of the rolling shutter is commanded
and the communication to the associated motor is checked.
Sun sensor activation sensitivity adjustment trimmer:
if you turn it clockwise, the anemometer sends the
commands with higher light intensity
The anemometer commands the up movement of the rolling shutter when strong wind or low light are present, and
its down movement if light increases (if wind is present, the down movement is inhibited)
After the wind sensor operation, the motor does not accept any command for 5 minutes.
At the end of this time,
if there is no wind and light is present, the anemometer commands again a down movement of the rolling shutter.
Wind sensor activation sensitivity adjustment
trimmer: if you turn it clockwise, the anemometer
sends the command with higher wind intensity.
If you turn the trimmer clockwise, the rolling shutter goes up with higher light intensity and goes down with
the same light intensity.
If you turn the trimmer counter-clockwise, the rolling shutter goes up with lower light intensity and goes down with
the same light intensity.
MORNING
EVENING
EVENING
MORNING
SUN BLIND OPEN
PRESS ONE OF THE TWO TEST RADIO
COMMUNICATION PUSH-BUTTONS
(same function)
NIGHT
NIGHT
4.1 SUN SENSOR ADJUSTMENT
Fig.17
Fig.18
Fig.19
Summary of Contents for TM XA R 433
Page 1: ...TM XA R 433...
