8
a
90°
A
B
C
EN
g
L
iSH
Fig.16
Fig.17
Fig.18
Fig.19
Fig.20
Fig.21
Fig.22
7) Remove the adjustment key and screw the cap of the
travel-limit screw
8) Lightly grease the operator pinion.
9) Using the handles, insert the operator in the bearing case as
shown in Fig.17 A,B
10) Take the gate to its
CLOSED position
.
11) Free the mechanical release, referring to paragraph 7.2.
12) Take the released gate into open position, making sure that
the released part freed from the gate
remains in the gate closed
position as shown in Fig.20 ref.
a
.
13) Raise the operator with its handles (Fig.21 ref. A), inserting
the pinion in the grooved bush in the bearing case. To make
the operation easier, slightly rotate the operator until coupling
takes place.
14) Place the supplied key under the operator, as shown in figure
21, in order to support the motor.
15) Insert and screw the fastening screws with groover and
washer as shown in Fig. 21 C, in order to secure the operator to
the bearing case.
16) Close the gate and re-lock it to the mechanical release.
www.metalines.com